Posts Tagged ‘PCP’

New York Hunting License Includes Airgun Regulations

Monday, August 16th, 2010

New York hunting licenses for the 2010-2011 season go on sale today and for the first time will include regulations for taking small game with air guns.  Including air guns in these regulations ensures hunters are aware of minimum power and caliber requirements for humane harvesting of critters and predators.

Air guns may be used to hunt squirrels, rabbits, hares, ruffed grouse, and furbearers that may be hunted (e.g., raccoons and coyotes) and unprotected species.

2010-11 New York Hunting and Trapping Regulations Guide

Per the regulations, unprotected species include porcupine, red squirrel, woodchuck, English sparrow, starling, rock pigeon and monk parakeet.  No license is required for hunting unprotected species with an air gun whereas a license is required when using a bow or firearm.  New York requires a minimum .17 caliber and a muzzle velocity of 600 fps.

Crosman’s lineup of Nitro Piston break barrel rifles and Benjamin PCP rifles provide hunters with an economical and less intrusive alternative.  Ammunition is less expensive, the report from an airgun is nearly silent compared to a firearm and rounds do not travel as far.  A Crosman or Benjamin air gun is the ideal choice for urban areas when disturbing neighbors may be a concern.

Get ready for the season by checking out our full line of air rifles, air pistols and ammunition.

Marauder PCP Pistol: Coming In November

Friday, July 16th, 2010

A closer look at the Benjamin Marauder PCP Pistol, coming in November.  Click here to enter your email address to be notified when it becomes available.

Gun Week Reviews 1700P PCP Silhouette Pistol

Friday, May 7th, 2010

Steve Ware reviews the Crosman 1700P, the company’s debut PCP pistol specifically for silhouette and target competitions.  With a top-end velocity of 450 fps and 88 years of gun-making experience behind it, the 1700P proudly features a German-made Lothar Walther™ precision barrel ideal for match competition.

What really convinced me that this is an excellent pistol was the fact that I took five shots at our 1/20th scale pigs that we use for shoot-off targets to break ties. They are set at the ram distance of 18 yards. The pig is about the size of one of your fingernails and not all that easy to see with older eyes. I hit four of five of the little critters, and all four hits were in the same place, just right of center. That told me that I needed a click or two of left windage to really dial the pistol in.

If you’re in the market for the hottest pistol in competitive shooting, be sure to check out the 1700P from Crosman. We’ve made sure it meets all the requirements for both the International Handgun Metallic Silhouette Association (IHMSA) and National Rifle Association (NRA) competitions.

All in all, Crosman has produced a PCP pistol that is affordable, extremely accurate, and easily tunable to the needs of any shooter demanding superior accuracy. Additionally, it is at least two thirds the price of the next lowest PCP pistol that I could find on the web. I am so convinced that this is an excellent pistol that I have purchased a used scuba tank and have a DIN to Foster valve adaptor on order.

Read Steve’s full review here, but don’t wait, it will only be up for a couple of weeks.  Once it’s gone, get the gun and Take It Outside!

Hunting in South Africa: Part 1 by Jim Chapman

Wednesday, October 28th, 2009

Introduction
As an outdoor writer, and moreover one specializing in hunting airguns, I get to shoot a lot of airguns. There are many good rifles being produced today, and a few great ones. But what we have been missing is a great hunting airgun at a price point most hunters can afford. In a marketplace that is populated by guns starting at over a thousand dollars, not to mention the cost of adjunct gear such as filling equipment, it is difficult for new shooters to enter the sport. That is why I got excited when Crosman entered the precharged pneumatic arena, first with the Discovery then following with the Marauder.
The Discovery is a single shot PCP rifle that has everything the airgun hunter needs in an entry level gun; it is accurate, powerful, and reliable, fills to a low charge pressure with a handpump, and can run on CO2 for lower powered indoor shooting. But the truly compelling thing with this rifle is that packaged with a handpump it cost far less than anything else the airgun hunter could buy. I was lucky enough to be sent one of the first pre-production guns to shoot, hunt with, and give some feedback on. But truth is that I think the engineers and market research people got it just about perfect and delivered exactly what the market wanted and needed. However, there was room for a higher tier rifle that bridged the simple no frill design requirement of the Discovery and the more sophisticated (and much more expensive) rifles at the high end of the price/performance spectrum. While I really like the Discovery, I thought it would be perfect if there was an option to get it with a shrouded barrel, and if there was an option for a premium trigger to be installed by their custom shop (even if that cost a few hundred dollars more), and if there was a multi-shot version. That was the point; this gun hit so close to the mark that the only thing needed to make it a better gun were features only found on much more expensive rifles!

Then a couple years later I received word that Crosman had a new PCP rifle in development, and again was offered a pre-production gun for evaluation. The Marauder was unveiled at the 2009 SHOT Show in Orlando; and what was introduced to the airgunning world was a rifle offering features previously found only on much more expensive models. The Marauder has a 10 shot rotary magazine, a sophisticated match grade adjustable trigger that is a dream, and comes standard with a shrouded barrel that is whisper quiet. This in addition to the Marauder’s intrinsic accuracy and the power to take any small game from squirrels to woodchucks, has resulted in a gun I love to carry in the field. As a matter of fact, I selected the Marauder as my small game rifle for an airgun safari in South Africa’s Eastern Cape, which in past years has been a challenging testing ground requiring a gun to shoot with precision, hit hard, and be reliable. When you’re thousands of miles from home, it makes sense to only carry gear you believe in. The Marauder has proven itself to me.
My intention with these hunts was to demonstrate that the Marauder is the real deal for small and medium game hunting, and that they can be used to make one shot kills that cleanly anchor the tenacious small game and pest species in this hunter’s paradise. Even though this book was based on hunting in Africa, the experience speaks directly to the guns suitability for hunting anywhere in the world.

Hunts were setup over a five week period in South Africa, and I planned to make the most of the hunts. My friends and professional hunters Rob Dell and Andrew Myers were contacted to organize the trip. From my Indiana based office I was phoning sponsors; Crosman for guns, scopes, and pumps to be drop shipped for pick up on my arrival to the Eastern Cape, Pyramyd Airgun, arguably the biggest and one of best airgun supplier in North America came through with financial support, and Adventures in airguns supplied additional equipment. It all came together and formed one of the most enjoyable hunts of my life.
In this small booklet my objective is to share several facets of hunting with the Marauder, relating our experiences regarding the guns, the gear, the people, and the game. And in the end I believe you’ll see that if you own a Crosman Marauder, you have a gun that takes you anywhere you want to go.

Hunting with Airguns
There is a long tradition of hunting with pre-charged pneumatic (PCP) air guns, dating back to the late 1600s when big bore air rifles were used by European nobility to take large game animals. In more recent years, spring piston airguns became available to the masses, and after World War II there was a dramatic increase in the availability of guns. The sport has continued to grow in much of the world, especially in those locales where gun ownership is not an option for the civilian population. In Europe there is a tradition of high quality airgun manufacturing, especially in Germany and the United Kingdom.
As a matter of fact, the UK has arguably been the center of the modern airgunning world. They produce many of the finest spring piston and PCP airguns in the world; and support a vibrant airgun hunting community with a couple popular magazines dedicated to reporting on and promoting the sport. And while the range of available guns offered to the market comprises both spring piston and PCP power plants, there has been an upsurge in the popularity of precharged pneumatic guns in the market over the last decade.

In the United States serious airgun hunting has been relatively unknown, and even less so when it comes to PCPs. However, as Americans are faced with increased urbanization, the attraction of the air powered hunting arm becomes ever more apparent; providing a means of hunting in areas that are more densely populated where firearms are a no-go. While many hunters feel that PCPs are easier to shoot accurately and tend to be more powerful than spring piston guns, the fact that there has been a dearth of appropriately priced PCP guns for the American sportsman has blocked a lot of new hunters from entering the sport. With Crosman’s release of the Discovery and the Marauder, this is going to change in my opinion!

In this book I will examine how these new Crosman guns can be used for field work, and relate some firsthand experiences coming out of our five week airgunning trek in South Africa, in which I relied solely on the Marauder and the Discovery for small game hunting.

Why Hunt With Airguns?
As stated previously, in Europe and much of the world airguns are the only option available to people wishing to hunt. They simply are not allowed to possess firearms, or the population densities are so high that there is not enough open land to hunt over. But there are several reasons that shooters everywhere appreciate; airguns are relatively quiet (in the case of the Marauder, less than a whisper) and have a limited carrying range, they can therefore be used to perform pest control duties and hunt in fairly populated areas, and due to the limited range can even be shot safely in the backyard or down in the basement. The cost of airgun projectiles is much lower than even .22 rimfire ammunition, with pellets costing a penny or two per round. The challenge of the hunt is increased with airguns, because to ethically take game the hunter must close the distance which requires honed hunting skills. In this respect airgun hunting offers many parallels to bow hunting while incorporating traditional marksmanship.

The modern PCP airgun is capable of tack driving accuracy out to sixty or seventy yards, while most springers can be used with confidence out to thirty five or forty yards. Another benefit is that the hunter can get in a great deal of practice. I will often go down to my basement range and put a couple hundred rounds through a gun I’m getting ready to take with me into the field. You’re not going to be able to do this with a firearm unless you happen to live on a ranch in Montana.
The last reason on my list is the least tangible …. Airguns are cool! There is something about the engineering that goes into these guns, along with the diversity in designs available that makes airguns a highly addictive past time. The airgun uses a tiny puff of air to send a fifteen or so grain piece of lead down range to anchor their quarry! This is a fact that always amazes me…

by Jim Chapman

———————————————————————————————————————————

All right folks that is all for part one, we will be posting the rest of the book a few chapters at a time over the next few months. After that the full book will be available to download.

Thanks for reading.

Joshua

Reporting on the Crosman Challenger PCP: Part 2

Friday, October 9th, 2009

PCP Challenger

I promised you I would check out the shot performance of the new Challenger right “out of the box”.

First, using the Benjamin hand pump, I charged the Challenger to 2000 psi – the factory recommended fill pressure. I used the gauge on the pump for all tests to maintain consistency.

Next, I chronographed the shots and noticed a close to 540 fps starting velocity with Crosman 7.9 grain Premiers. The factory claims a 530 fps velocity so it seems this one was set to shoot a hair hot.

I chose the 7.9 grain Premier pellet because it is what I will use later when I bring the power up to field target velocities. Beginning at 540 fps helped me decide where to stop, but I will take it further to see how the shot string looks.

My task was to chronograph each shot until the velocity came back to around 510 fps. I’m sharing the graphs with you so you know what to expect from an “out of the box” stock Challenger with a field pellet. Velocities are similar for a wadcutter match pellet.

Below is the complete shot string shooting from 2000 psi down to 1000 psi. This yielded a 50 fps spread with a 541 fps average velocity for 107 shots.

Shot String 1

The shot string indicates that a 2000 psi charge pressure brings you right into the sweet spot of the charge and not the beginning of it. My Challenger will require an adjustment (most likely slightly shortening the stroke), or a slightly higher charge pressure to find the start of the sweet spot which will yield more shots from the charge.

Keep in mind that most gauges are consistent but are not necessarily accurate. Although I charged the Challenger to 2000 psi on the hand pump’s gauge, it may have actually been 1900 psi and I might need to charge a little higher on that gauge.

I recommend that once you find the correct charge pressure for your particular gun, that you make a mark on the gauge of your gun. That way you will know where to fill it every time; whether with a pump, scuba tank or any fill assembly you choose to use. The gauge on your gun is the same no matter how you fill your gun. Incidentally, I charged the gun back up to 2000 psi with the Benjamin hand pump and it took 58 strokes. I also recommend that you mark your gun’s gauge so you know when to recharge it (once you decide the optimal spot). With your gauge marked in both places, any shot taken with the needle on the gauge between those 2 marks should be a good shot.

The next graph shows the shot string trimmed down to a 24 fps spread for 80 shots. Certainly enough for any 10 meter 3 position match.

Shot String 2

The following graph is for people like me looking for the tightest spread possible from their equipment. This string was trimmed down to a 19 fps spread and 70 shots. This would work very well for people that want to shoot longer distances at the factory stock velocity. Great for MiniSniping or even target class silhouette. For silhouette I would probably increase the velocity closer to 575 fps and live with the reduction in shot count. Those rams at 45 yards some times need a little more push to get them to topple. They will drop with the velocity from the Challenger as it is “out of the box”, but I like a little more just in case.

Shot String 3

The 70 shots yielded a total of 368.8 accumulated ft lbs.

When we power up the Challenger for 11 – 11.5 ft lbs of pressure, it should yield around 25 to 30 shots (368.8/11.5=32). We look forward to seeing how that will work out.

On another note, keep in mind that replacing any part of a Crosman gun, that did not come with the gun or was designed for that gun, voids the warranty. So when we go and power up the Challenger (even though we are using Crosman parts) we are voiding the warranty. Please be very clear in understanding that if you follow along with us and do the same things, you will be voiding your warranty. Just something important for you to think about….

I charged Hans’s Challenger to 2000 psi and fired through the chronograph. The first shots were a little low in velocity and quickly came up to the 530 fps velocity advertised by Crosman. Hans’s Challenger appears to prefer a 1950 to 1925 psi charge (on his gauge) at this time.

Hans mounted a scope to his Challenger and did some quick shot groups to see how it performed out of the box – with no preparations or adjustments at all. At 10 yards, his 5 shot group was 1 pellet hole. Not a one hole group mind you, but one pellet hole that would hit the 10 dot on a 10 meter target centered every time! At 25 yards in a little bit of a wind Hans grouped .25” ctc. At 40 yards Hans grouped .75” ctc. Remember this is benched, in an inconsistent wind at 530 fps with 7.9 premiers. Bringing the velocity up to WFTF levels will tighten those distant groups for sure. It’s very, very promising.

So there you have it. What you can expect from the Crosman Challenger right out of the box. If you are shooting to 10 meters, then you can get close to 100 shots once you find the best starting charge pressure for the gun’s sweet spot. If you plan on shooting longer distances you can get around 70 to 80 shots depending on your needs.

We are going to review scope setup for the Challenger down the road, so I have some homework for you….

Visit our website (http://ateam.100free.com/Articles.htm) and print the “A” Team Parallax adj document. You can use these directions to prepare your scope for the Challenger.

Also on our website (http://ateam.100free.com/Crosman.htm) is our A Team PCP Tuning Procedures document.

Download and save or print each of these documents and become familiar with them.

Ray and Hans ~ The “A” Team